Hydraulic Press Blanking Machine for LPG Cylinder Production Line
This line is mainly designed to blank circle for LPG cylinder. With three circles molds, it not only can effectively reduce material consuming, but also increase product efficiency.Decoiler machine
| No | Item | Parameters | Unit | Remark |
| 1 | The maximum outer diameter | 1500 | mm | |
| 2 | Width | 200-1800 | mm | |
| 3 | Maximum load | 30 | t | |
| 4 | Line speed | 8-25 | m/min | |
| 5 | Motor power | 45 | KW |
Feeder machine
| No. | Item | Parameters | Unit | Remark | |
| 1 | Thickness of steel plate | 1-5 | mm | ||
| 2 | Steel plate width | 1800 | mm | Maximum | |
| 3 | Feeding accuracy | Servo type | ±0.5 | mm | |
| Usual type | ±3 | mm | |||
| 4 | Feeding speed | 200 | mm/s | Maximum | |
Hydraulic blanking machine
| No | Item | Parameters | Unit | Remark | ||
| 1 | Nominal force | 10000 | KN | |||
| 2 | Maximum working pressure of liquid | 25 | MPa | |||
| 3 | Master cylinder stroke | 300 | mm | |||
| 4 | The maximum opening height | 1150 | mm | Minimum closed height:850 | ||
| 5 | Work table effective size | Left to Right | 2560 | mm | Size between pillar | |
| Front to Rear | 2300 | mm | Edge to edge | |||
| 6 | Master cylinder Running speed | Rapid downward | 130 | mm/s | ||
| Work into | 20-8 | mm/s | ||||
| Return trip | 110 | Mm/s | ||||
| 7 | Motor power | 90 | KW | |||
| 8 | Voltage | 415V/50HZ | ||||
| 9 | Machine covers area | Left to Right | 5500 | mm | ||
| Front to Rear | 2400 | mm | ||||
| High above the ground | 3800 | |||||
Our Service
* Sample testing support.
* View Factory.
* Training how to install and use the machine.
* Engineers available to service machinery overseas
FAQ