Powder spraying for cylinder surface treatment
Coating Powder
Powder spraying is to use powder spraying equipment (electrostatic spraying machine) to spray powder coating on the surface of the workpiece. Under the action of static electricity, the powder will be uniformly adsorbed on the surface of the workpiece to form a powder coating; the powder coating is baked at high temperature Baking, leveling and curing, it becomes the final coating with different effects (different effects of powder coatings); the spraying effect of powder spraying is better than the spraying process in terms of mechanical strength, adhesion, corrosion resistance, and aging resistance, and the cost is also Under the same effect of spray paint.
The coating is made of special resin, pigments and fillers, curing agents and other additives, mixed in a certain proportion, and then prepared by processes such as hot extrusion, crushing and sieving. They are stable in storage at room temperature. After electrostatic spraying, friction spraying (thermosetting method) or fluidized bed dip coating (thermoplastic method), they are heated and baked to melt and solidify to form a smooth and bright permanent coating film for decoration. And the purpose of anti-corrosion.
Application Field
LPG Cylinder / Wheel Rim / Metal Sheet
What is the use of metal surface spray treatment? Because corrosion is an irreversible spontaneous process, even a high-quality spray paint coating retention layer is difficult to protect the metal from corrosion, especially when the metal surface spray paint coating layer is poorly bonded, damaged or damaged.
How to operate the spraying treatment of metal surface The equipment used for spraying includes air pump, air filter, air pipe and spray gun. Commonly used spray guns include suction type, opposite nozzle type and outflow type. When spraying, the handle is pressed and compressed air is sprayed out from the air outlet nozzle, so that the paint solution is evenly sprayed on the surface from the paint outlet nozzle.
There are defects such as pinholes, blisters, cracks, substitutions, etc., and the protective effect of the spray paint coating.
Packing & Delivery
1. Keep away from fire, avoid direct sunlight, and place in a well-ventilated place with a temperature below 35°C.
2. Avoid storing in places susceptible to contamination by water, organic solvents, oils and other materials. Safety of painting construction site
3. The equipment used for painting work must be well grounded to eliminate static electricity.
4. Avoid unexplained discharge of the coating machine.
Company Profile
Wuxi Longterm Machinery Technologies Co., Ltd. is a collection of scientific research and development and production of different kind of Powder coating production line. Our company has a technical administration team who engages wire and cable equipment industrial more than twenty years, as well as experienced engineer and skilled workers, our honest business reputation and good sales achievement, win the trust from our domestic and overseas customers, the products are exported to United States, France, Spain, Portugal, New Zealand, Brazil, Mexico, Chile, South Africa, Zambia, Egypt, South Korea, Singapore, Indonesia, Thailand, etc.
FAQ
1. Are you manufacturer or trading company?
A1: We are manufacturer for more than 15 years and have been keeping good cooperation relationship with many famous factories.
2. Can you provide samples for quality checking before placing an order?
A2: Free sample is available, the customer only needs to pay the freight.
3. Will you provide discount service for the new customers?
A3: Different discount depends on different products and different quantity, warmly welcome new customers to cooperate with us and we will offer the best price and high quality products for every customer.
4. How about shipping time?
A4: About 3-5 working days after payment.
Coating Powder
Powder spraying is to use powder spraying equipment (electrostatic spraying machine) to spray powder coating on the surface of the workpiece. Under the action of static electricity, the powder will be uniformly adsorbed on the surface of the workpiece to form a powder coating; the powder coating is baked at high temperature Baking, leveling and curing, it becomes the final coating with different effects (different effects of powder coatings); the spraying effect of powder spraying is better than the spraying process in terms of mechanical strength, adhesion, corrosion resistance, and aging resistance, and the cost is also Under the same effect of spray paint.
| CAS No: | 25135-73-3 |
| MF: | C22H26O10 |
| Main Raw Material: | POLYURETHANE |
The coating is made of special resin, pigments and fillers, curing agents and other additives, mixed in a certain proportion, and then prepared by processes such as hot extrusion, crushing and sieving. They are stable in storage at room temperature. After electrostatic spraying, friction spraying (thermosetting method) or fluidized bed dip coating (thermoplastic method), they are heated and baked to melt and solidify to form a smooth and bright permanent coating film for decoration. And the purpose of anti-corrosion.
Application Field
LPG Cylinder / Wheel Rim / Metal Sheet
What is the use of metal surface spray treatment? Because corrosion is an irreversible spontaneous process, even a high-quality spray paint coating retention layer is difficult to protect the metal from corrosion, especially when the metal surface spray paint coating layer is poorly bonded, damaged or damaged.
How to operate the spraying treatment of metal surface The equipment used for spraying includes air pump, air filter, air pipe and spray gun. Commonly used spray guns include suction type, opposite nozzle type and outflow type. When spraying, the handle is pressed and compressed air is sprayed out from the air outlet nozzle, so that the paint solution is evenly sprayed on the surface from the paint outlet nozzle.
There are defects such as pinholes, blisters, cracks, substitutions, etc., and the protective effect of the spray paint coating.
Packing & Delivery
1. Keep away from fire, avoid direct sunlight, and place in a well-ventilated place with a temperature below 35°C.
2. Avoid storing in places susceptible to contamination by water, organic solvents, oils and other materials. Safety of painting construction site
3. The equipment used for painting work must be well grounded to eliminate static electricity.
4. Avoid unexplained discharge of the coating machine.
Company Profile
Wuxi Longterm Machinery Technologies Co., Ltd. is a collection of scientific research and development and production of different kind of Powder coating production line. Our company has a technical administration team who engages wire and cable equipment industrial more than twenty years, as well as experienced engineer and skilled workers, our honest business reputation and good sales achievement, win the trust from our domestic and overseas customers, the products are exported to United States, France, Spain, Portugal, New Zealand, Brazil, Mexico, Chile, South Africa, Zambia, Egypt, South Korea, Singapore, Indonesia, Thailand, etc.
FAQ
1. Are you manufacturer or trading company?
A1: We are manufacturer for more than 15 years and have been keeping good cooperation relationship with many famous factories.
2. Can you provide samples for quality checking before placing an order?
A2: Free sample is available, the customer only needs to pay the freight.
3. Will you provide discount service for the new customers?
A3: Different discount depends on different products and different quantity, warmly welcome new customers to cooperate with us and we will offer the best price and high quality products for every customer.
4. How about shipping time?
A4: About 3-5 working days after payment.